PCA9849PW是NXP公司的一款I(lǐng)²C增強快速模式產(chǎn)品，PCA9849PW是4-channel ultra-low voltage, Fm+ I2C-bus multiplexer with reset，本站介紹了PCA9849PW的封裝應(yīng)用圖解、特點和優(yōu)點、功能等，并給出了與PCA9849PW相關(guān)的NXP元器件型號供參考。
PCA9849PW - 4-channel ultra-low voltage, Fm+ I2C-bus multiplexer with reset - I²C增強快速模式 - I²C - 恩智浦, LLC
The PCA9849 is an ultra-low voltage, quad bidirectional translating multiplexercontrolled via the I2C-bus. The SCL/SDA upstream pair fans out to fourdownstream pairs, or channels. A single SCx/SDx channel can be selected, determined bythe programmable control register. This feature allows multiple devices with the sameI2C-bus address to reside on the same bus. The multiplexer device canalso separate a heavily loaded I2C-bus into separate bus segments,eliminating the need for a bus buffer.
An active LOW reset input allows the PCA9849 to recover from a situation where one of thedownstream I2C-buses is stuck in a LOW state. Pulling the RESET pin LOW resets the I2C-bus state machineand deselects all the channels, as does the internal Power-On Reset (POR) function.
The pass gates of the switches are constructed such that the VDD1 pin is usedto limit the maximum high voltage which is passed by the PCA9849. This allows the use ofdifferent bus voltages on each channel, so that 0.8 V, 1.8 V, 2.5 V or 3.3 V parts cancommunicate without any additional protection. External pull-up resistors pull the busup to the desired voltage level for each channel. All I/O pins are 3.6 V tolerant.
- Ultra-low voltage operation, down to 0.8 V to interface with next-generationCPUs
- 1-of-4 bidirectional translating multiplexer
- Fm+ I2C-bus interface logic; compatible with SMBus standards
- Active LOW reset input
- 2 address pins allowing up to 16 devices on the I2C-bus
- Channel selection via I2C-bus
- Power-up with all switch channels deselected
- Low Ron switches
- Allows voltage level translation between 0.8 V, 1.8 V, 2.5 V and 3.3 V buses
- Reset via I2C-bus software command
- I2C Device ID function
- No glitch on power-up
- Supports hot insertion since all channels are de-selected at power-on
- Low standby current
- 3.6 V tolerant inputs
- 0 Hz to 1 MHz clock frequency
- ESD protection exceeds 6000 V HBM per JESD22-A114 and 1000 V CDM perJESD22-C101
- Latch-up testing is done to JEDEC Standard JESD78 which exceeds 100 mA
- Two packages offered: TSSOP16 and HVQFN16
