SA615是NXP公司的一款RF-IF building blocks產(chǎn)品，SA615是High performance low power mixer FM IF system，本站介紹了SA615的封裝應(yīng)用圖解、特點和優(yōu)點、功能等，并給出了與SA615相關(guān)的NXP元器件型號供參考。
SA615 - High performance low power mixer FM IF system - RF-IF building blocks - RF - 恩智浦, LLC
The SA615 is a high performance monolithic low-power FM IF system incorporating amixer/oscillator, two limiting intermediate frequency amplifiers, quadrature detector,muting, logarithmic Received Signal Strength Indicator (RSSI), and voltage regulator. TheSA615 combines the functions of NXP Semiconductors SA602A and SA604A, butfeatures a higher mixer input intercept point, higher IF bandwidth (25 MHz) andtemperature compensated RSSI and limiters permitting higher performance application.The SA615 is available in 20-lead SO (surface-mounted miniature package) and 20-leadSSOP (shrink small outline package).
The SA605 and SA615 are functionally the same device types. The difference betweenthe two devices lies in the guaranteed specifications. The SA615 has a higher ICC, lowerinput third-order intercept point, lower conversion mixer gain, lower limiter gain, lower AMrejection, lower SINAD, higher THD, and higher RSSI error than the SA615. Both theSA605 and SA615 devices meet the EIA specifications for AMPS and TACS cellular radioapplications.
- Low power consumption: 5.7 mA typical at 6 V
- Mixer input to >500 MHz
- Mixer conversion power gain of 13 dB at 45 MHz
- Mixer noise figure of 4.6 dB at 45 MHz
- XTAL oscillator effective to 150 MHz (L/C oscillator to 1 GHz local oscillator can beinjected)
- 102 dB of IF amplifier/limiter gain
- 25 MHz limiter small signal bandwidth
- Temperature-compensated logarithmic Received Signal Strength Indicator (RSSI) witha dynamic range in excess of 90 dB
- Two audio outputs — muted and unmuted
- Low external component count; suitable for crystal/ceramic/LC filters
- Excellent sensitivity: 0.22 μV into 50 Ω matching network for 12 dB SINAD(Signal-to-Noise-and-Distortion ratio) for 1 kHz tone with RF at 45 MHz and IF at455 kHz
- SA615 meets cellular radio specifications
- ESD hardened
- Cellular radio FM IF
- High performance communications receivers
- Single conversion VHF/UHF receivers
- SCA receivers
- RF level meter
- Spectrum analyzer
- Instrumentation
- FSK and ASK data receivers
- Log amps
- Wideband low current amplification
