PCA9847PW是NXP公司的一款I²C增強快速模式產(chǎn)品，PCA9847PW是8-channel ultra-low voltage, Fm+ I2C-bus multiplexer with reset，本站介紹了PCA9847PW的封裝應用圖解、特點和優(yōu)點、功能等，并給出了與PCA9847PW相關的NXP元器件型號供參考。
PCA9847PW - 8-channel ultra-low voltage, Fm+ I2C-bus multiplexer with reset - I²C增強快速模式 - I²C - 恩智浦, LLC
The PCA9847 is an ultra-low voltage, octal bidirectional translating multiplexer controlled viathe I2C-bus. The SCL/SDA upstream pair fans out to eight downstream pairs, orchannels. Any single SCx/SDx channel can be selected, determined by the programmablecontrol register. This feature allows multiple devices with the same I2C-busaddress to reside on the same bus. The multiplexer device can also separate a heavilyloaded I2C-bus into separate bus segments, eliminating the need for a busbuffer.
An active LOW reset input allows the PCA9847 to recover from a situation where one of thedownstream I2C-buses is stuck in a LOW state. Pulling the RESET pin LOW resets the I2C-bus state machineand deselects all the channels, as does the internal Power-On Reset (POR) function.
The pass gates of the multiplexers are constructed such that the VDD1 pin isused to limit the maximum high voltage which is passed by the PCA9847. This allows theuse of different bus voltages on each channel, so that 0.8 V, 1.8 V, 2.5 V or 3.3 Vparts can communicate without any additional protection. External pull-up resistors pullthe bus up to the desired voltage level for each channel. All I/O pins are 3.6 Vtolerant.
- Ultra-low voltage operation, down to 0.8 V to interface with next-generation CPUs
- 1-of-8 bidirectional translating multiplexer
- Fm+ I2C-bus interface logic; compatible with SMBus standards
- Active LOW reset input
- 2 address pins allowing up to 16 devices on the I2C-bus
- Channel selection via I2C-bus
- Power-up with all multiplexer channels deselected
- Low Ron switches
- Allows voltage level translation between 0.8 V, 1.8 V, 2.5 V and 3.3 V buses
- Reset via I2C-bus software command
- I2C Device ID function
- No glitch on power-up
- Supports hot insertion since all channels are de-selected at power-on
- Low standby current
- 3.6 V tolerant inputs
- 0 Hz to 1 MHz clock frequency
- ESD protection exceeds 6000 V HBM per JESD22-A114 and 1000 V CDM perJESD22-C101
- Latch-up testing is done to JEDEC Standard JESD78 which exceeds 100 mA
- Two packages offered: TSSOP24 and HVQFN24
